Open Wireshark and set it to capture. In the command prompt type tracert google.com. Take a screen capture of the Wireshark window. Analyze the output. Explain the process the ICMP messages are using
• Given the following pathping output, explain the process as well as what the output tells you.
D:>pathping -n testpc1
Tracing route to testpc1 [7.54.1.196]
over a maximum of 30 hops:
0 172.16.87.35
1 172.16.87.218
2 192.168.52.1
3 192.168.80.1
4 7.54.247.14
5 7.54.1.196
Computing statistics for 125 seconds…
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 172.16.87.35
0/ 100 = 0% |
1 41ms 0/ 100 = 0% 0/ 100 = 0% 172.16.87.218
13/ 100 = 13% |
2 22ms 16/ 100 = 16% 3/ 100 = 3% 192.168.52.1
0/ 100 = 0% |
3 24ms 13/ 100 = 13% 0/ 100 = 0% 192.168.80.1
0/ 100 = 0% |
4 21ms 14/ 100 = 14% 1/ 100 = 1% 7.54.247.14
0/ 100 = 0% |
5 24ms 13/ 100 = 13% 0/ 100 = 0% 7.54.1.196
Trace complete.
• Write a brief synopsis on IGMP. What is it? What is its use? How is it used? Be sure to use your own words.+
Sample Solution
