Design Proposal Report for Linisher Design

by | Jun 6, 2024 | engineering

Scenario
You are working for a design company who has been asked to produce a design proposal to meet the customers brief and specification. You are required to investigate and develop a design solution considering design for manufacture and design for assembly.
Produce a report to Include the following:
1. Identify the main Design problems associated with the Linisher design requirements: these may include things such as selection of drive systems, belt tensioning and tracking, guarding, dust extraction etc.
2. Produce concept sketches of a range of initial design solutions.
3. Produce a selection of design solutions for each design problem identified, giving reasons for their choke in terms of the parameters given in the PDS and consideration of manufacturing methods, volumes etc. Ensure your solution includes annotated design sketches / solutions for each of the main problems identified from the initial design analysed.
4. Produce a prototype design suitable to take to the design development phase using appropriate software and associated tools, explain the importance and value of the software to be used in the development of the design.
5. Document the design development showing how the design has been produced identifying specific design for manufacture and design for assembly concepts have been analysed and evaluated.
6. Analyse and evaluate the final design proposal and recommend any further design improvements or changes to reduce assembly or manufacturing costs.

Sample solution

Dante Alighieri played a critical role in the literature world through his poem Divine Comedy that was written in the 14th century. The poem contains Inferno, Purgatorio, and Paradiso. The Inferno is a description of the nine circles of torment that are found on the earth. It depicts the realms of the people that have gone against the spiritual values and who, instead, have chosen bestial appetite, violence, or fraud and malice. The nine circles of hell are limbo, lust, gluttony, greed and wrath. Others are heresy, violence, fraud, and treachery. The purpose of this paper is to examine the Dante’s Inferno in the perspective of its portrayal of God’s image and the justification of hell. 

In this epic poem, God is portrayed as a super being guilty of multiple weaknesses including being egotistic, unjust, and hypocritical. Dante, in this poem, depicts God as being more human than divine by challenging God’s omnipotence. Additionally, the manner in which Dante describes Hell is in full contradiction to the morals of God as written in the Bible. When god arranges Hell to flatter Himself, He commits egotism, a sin that is common among human beings (Cheney, 2016). The weakness is depicted in Limbo and on the Gate of Hell where, for instance, God sends those who do not worship Him to Hell. This implies that failure to worship Him is a sin.


This question has been answered

God is also depicted as lacking justice in His actions thus removing the godly image. The injustice is portrayed by the manner in which the sodomites and opportunists are treated. The opportunists are subjected to banner chasing in their lives after death followed by being stung by insects and maggots. They are known to having done neither good nor bad during their lifetimes and, therefore, justice could have demanded that they be granted a neutral punishment having lived a neutral life. The sodomites are also punished unfairly by God when Brunetto Lattini is condemned to hell despite being a good leader (Babor, T. F., McGovern, T., & Robaina, K. (2017). While he commited sodomy, God chooses to ignore all the other good deeds that Brunetto did.

Finally, God is also portrayed as being hypocritical in His actions, a sin that further diminishes His godliness and makes Him more human. A case in point is when God condemns the sin of egotism and goes ahead to commit it repeatedly. Proverbs 29:23 states that “arrogance will bring your downfall, but if you are humble, you will be respected.” When Slattery condemns Dante’s human state as being weak, doubtful, and limited, he is proving God’s hypocrisy because He is also human (Verdicchio, 2015). The actions of God in Hell as portrayed by Dante are inconsistent with the Biblical literature. Both Dante and God are prone to making mistakes, something common among human beings thus making God more human.

To wrap it up, Dante portrays God is more human since He commits the same sins that humans commit: egotism, hypocrisy, and injustice. Hell is justified as being a destination for victims of the mistakes committed by God. The Hell is presented as being a totally different place as compared to what is written about it in the Bible. As a result, reading through the text gives an image of God who is prone to the very mistakes common to humans thus ripping Him off His lofty status of divine and, instead, making Him a mere human. Whether or not Dante did it intentionally is subject to debate but one thing is clear in the poem: the misconstrued notion of God is revealed to future generations.

 

References

Babor, T. F., McGovern, T., & Robaina, K. (2017). Dante’s inferno: Seven deadly sins in scientific publishing and how to avoid them. Addiction Science: A Guide for the Perplexed, 267.

Cheney, L. D. G. (2016). Illustrations for Dante’s Inferno: A Comparative Study of Sandro Botticelli, Giovanni Stradano, and Federico Zuccaro. Cultural and Religious Studies, 4(8), 487.

Verdicchio, M. (2015). Irony and Desire in Dante’s” Inferno” 27. Italica, 285-297.

Sample Answer

Sample Answer

 

 

Design Proposal Report for Linisher Design

Introduction

In response to the customer’s brief and specifications, this report presents a design proposal for a Linisher, addressing various design challenges related to drive systems, belt tensioning and tracking, guarding, and dust extraction. The report provides concept sketches, design solutions, and a prototype design with a focus on design for manufacture and design for assembly principles.

1. Main Design Problems Associated with Linisher Design Requirements

The main design problems associated with Linisher design requirements include:

– Selection of appropriate drive systems to ensure optimal performance and efficiency.
– Efficient belt tensioning and tracking mechanisms to maintain accuracy and reliability.
– Effective guarding systems to ensure operator safety during operation.
– Efficient dust extraction systems to maintain a clean working environment and protect the equipment.

2. Concept Sketches of Initial Design Solutions

Concept sketches have been developed to explore various design ideas and concepts, considering the mentioned design problems. These sketches serve as a starting point for developing practical solutions.

3. Design Solutions for Identified Problems

Design solutions have been proposed for each identified problem:

– Drive Systems: Selection of a robust motor with variable speed control for optimal performance.
– Belt Tensioning and Tracking: Implementation of tensioning rollers and tracking mechanisms for precise belt alignment.
– Guarding: Utilization of transparent guards made of durable materials to ensure operator safety.
– Dust Extraction: Integration of a powerful extraction system with efficient filters to maintain a clean working environment.

4. Prototype Design Using Appropriate Software

A prototype design has been developed using CAD software, allowing for detailed modeling and simulation of the Linisher. The software enables precise design development, visualization, and analysis, ensuring the feasibility and functionality of the proposed solution.

5. Design Development Process

The design development process involved analyzing and evaluating design for manufacture and assembly concepts. Various manufacturing methods and volumes were considered to optimize production efficiency. The design was refined iteratively to enhance manufacturability and ease of assembly.

6. Final Design Proposal Evaluation

The final design proposal has been thoroughly analyzed and evaluated. Recommendations for further design improvements include:

– Simplifying assembly processes to reduce production time and costs.
– Standardizing components to streamline manufacturing processes.
– Incorporating modular design elements for flexibility and scalability.

In conclusion, the proposed Linisher design addresses key design challenges while incorporating design for manufacture and assembly principles. By implementing the recommended improvements, the design can achieve enhanced efficiency, cost-effectiveness, and overall performance.

 

 

This question has been answered.

Get Answer