Explore the use of inferential and descriptive analysis in public safety agencies. Selecting 2 different public safety agencies, find 1 example displaying the use of descriptive data and 1 example reflecting inferential analysis. In 2 paragraphs, you will introduce your examples to the class, name the type of analysis undertaken, and suggest other types of statistical analysis that could be undertaken with these data or by including other data.
The specific steps are as follows:
1.Engage in independent research, and find 2 different public safety agencies using statistical analysis. ◦Of your selected examples, 1 example must reflect the use of descriptive data and 1 must be an example of inferential analysis
mL distilled water, 1mL alcohol and the above constituents in varied concentrations. The average concentration is denoted as ‘1’, half the average is denoted as ‘0.5’ and approximately ‘0.75’ to ‘1.25’ is the actual range of blood components. The experiments are conducted with various concentrations as well, which are over the standard range & for extreme cases, & are denoted as 1.5, 1.75 2, 2.25 & 3. A cell was designed which was rectangular in shape having dimensions 12.5cms x 1cm x 2cms. The cell was used to measure RF response of various blood constituents. The cell was lined with a thin Cu foil and a copper wire was connected to 2 connectors which were placed on extreme ends of the cell. The external radiations were reduced by placing the cell in an iron box which was earthed. This forms the dielectric loss cell. The cell was then connected via RF cables to the tracking generator and signal analyzer. The entire setup was secured firmly avoid mechanical movements. Experiments were carried out using the slow sweep and the fast sweep. The experiment was conducted after an hour and 24 hours to verify the accurateness of the results. In comparison to the initial results, these were precise. The tracking generator used is Signal Hound USB-TG44A which ranges from 10 Hz – 4400 MHz and the signal analyzer used is Signal Hound USB-SA44B which ranges from 1 Hz – 4400 MHz. A separate power supply is not essential as it is fed from the USB cable. The tracking generator and signal analyzer are approximately 8” long, light in weight and could be used practically anywhere. Chapter IV (FPGA for Non-Invasive Cholesterol Measurement) Software and hardware components operating together to perform a definite application is called Embedded Systems. The hardware platform comprises of an i/p device, an o/p display, a microcontroller (uC) / microprocessor (uP), application software and an onboard memory. Designing embedded systems is getting more complicated nowadays due to the stiff restraints on power consumption, performance, size & area usage. Hence, the software/hardware co-design procedure is utilized to plan embedded systems to decrease the measure of time used on debugging & development. uPs whose behaviour & architecture are completely described utilizing a subset of an Hardware Description Language (>GET ANSWER